Og action...

Yaml

Da jeg ikke ville skrive en spileditor for at spare tid, besluttede jeg at bruge yaml-filer. Fordelen er, at de også kan bruge referencer for at undgå gentagelser. Og i fremtiden kunne jeg eventuelt lave en editor, der eksporterer yaml-filer.

I yaml-filerne skulle hver handling beskrives, der kunne ske pr. scene og person. Herunder ser du et stykke af scene20.yml. Her kan du se, at det regner i 5 sekunder, og at der vises en tekst, når scenen starter. Du ser også nogle hover-handlinger, og hvad der skal ske, når du fx vælger handlingen “åbn” “informationstavle”.

# START scene
# ==================================================
*action-scene-entities-ready-after:
  - <<: *particle-system
    <<: *particle-system-settings-rain
    id: 200143
    ukey: *particle-rain-20
    stopTime: 5

*action-scene-start:
  - <<: *trigger
    id: 200144
    run_once: true
    methods:
      - *particle-rain-20:
        - start: nil
  - <<: *text
    id: 200104
    run_once: true
    text: "The Netherlands, Drente\n52°52'3.95\"N, 6°52'15.01\"E"
    <<: *tween-text-bottom-left-fade-in-fade-out

# HOVER
# ==================================================
*action-hover:
  *information-board1: Information board
  *portal-key: An old stone with inscriptions
  *branch: A tree root
  *pole: Pole
  *broken-information-board1: Broken information board
  *dolmens: Dolmens
  *stone-circle: Stone circle
  *hotspot-20-exit: Go home
  *hotspot-20-stone-circle: The center of the stone circle

# GLOBAL OPEN
# ==================================================
*action-open:
  *information-board1:
    - <<: *say
      id: 200007
      text: You cannot open an information board, it is a wooden panel with text and images
  *portal-key:
    - <<: *walk
      id: 200105
    - <<: *say
      id: 200008
      text: I cannot open the stone

*action-lookat:
  *portal-key:
    - <<: *walk
      id: 200121
    - <<: *say
      id: 200041
      text: It looks like an old stone with something written on it, it looks very interesting

Det er også muligt, at en entity får andre handlinger end de globale handlinger for scenen. Det gør man ved at tilføje følgende nederst i filen.

*diana:
  *action-pickup:
    *dolmens:
      - <<: *walk
        id: 200094
        target:
          x: 600
          y: 175
          framesetIndex: *move-up
      - <<: *say
        id: 200095
        text: What do you think? Do you really think I could lift that?

Referencerne til alle entities, fx *dolmens, er beskrevet i assets/refs.yaml, og dem kan jeg genbruge overalt. Teksterne text: bliver omsat til nøgler og eventuelt oversat. Herunder ser du en del af refs.yaml

...

# tweens
# fade in, show text 3 seconds, fade out and move to the left
tween-text-bottom-left-fade-in-fade-out: &tween-text-bottom-left-fade-in-fade-out
  textArguments:
    color: *color-white-hidden # going to fadein, using the tweens
    scale: .50 # @todo *scale-half-size
  font: *font-ui-text
  xOffset: *offset-left
  yOffset: *offset-bottom
  yOffsetIncludeUi: true # offset including menus (above menu)
  offsetMargin: [0,0,5,5] # top, right, bottom, left @todo global margin
  tweens:
    - duration: 2
      properties: 
        color: *color-white
    - duration: 1
      properties:
        color: *color-white-hidden
        x: -10
      wait: 3

# particle schortcuts
particle-system-settings-rain: &particle-system-settings-rain
  emissionRate: 200
  speed: 
    - 300
    - 400
  linearAcceleration:
    - 0
    - 800
    - 0
    - 1000
  sizes:
    - 1
    - 0.5
    - 0.2
    - 0.1
    - 0.8
  sizeVariation: 1
  emitterLifetime: -1
  particleLifetime:
    - 0.8
    - 1.5
  colors:
    - 0 # r
    - 0 # g
    - 0.3 # b
    - 0.8 # a
    - 0 # r
    - 0 # g
    - 0.8 # b
    - 0.8 # a

# characters
nikki: &nikki 10
martin: &martin 11
diana: &diana 12

# -- scene 20
information-board1: &information-board1 20002
portal-key: &portal-key 20003
branch: &branch 20004
broken-information-board1: &broken-information-board1 20005
pole: &pole 20006
dolmens: &dolmens 20007
stone-circle: &stone-circle 20008
hotspot-20-stone-circle: &hotspot-20-stone-circle 20009
hotspot-20-exit: &hotspot-20-exit 20010
scene-menu-20: &scene-menu-20 20011
particle-rain-20: &particle-rain-20 20012
...

# -- scene 21
...

Jeg kan lave en custom handling af hvad som helst og fange den i Lua. Listen over handlinger ser lige nu sådan ud.

action-open: &action-open 1
action-close: &action-close 2
action-give: &action-give 3
action-pickup: &action-pickup 4
action-lookat: &action-lookat 5
action-talkto: &action-talkto 6
action-push: &action-push 7
action-pull: &action-pull 8
action-use: &action-use 9
action-hover: &action-hover 30
action-walkto: &action-walkto 31
action-say: &action-say 32
action-say_options: &action-say_options 34
action-inventory: &action-inventory 35
action-cannot-walk-to-point: &action-cannot-walk-to-point 36
action-popup: &action-popup 37
action-animation: &action-animation 38
action-scene-start: &action-scene-start 39
action-scene-entities-ready-after: &action-scene-entities-ready-after 40
action-camera: &action-camera 41
action-text: &action-text 44
action-modify-action: &action-modify-action 45
action-hotspot: &action-hotspot 46
action-trigger: &action-trigger 47
action-statement: &action-statement 48
action-world-loaded: &action-world-loaded 49
action-use-direct: &action-use-direct 50
action-audio: &action-audio 51
action-particle-system: &action-particle-system 52

Behandling af handlingerne

yaml-filerne bliver omsat til json og derefter til messagepack-filer, som er mange gange mindre og bliver behandlet mange gange hurtigere.

Derefter kommer det rigtige arbejde, men det kan ikke rigtig vises tydeligt her, da action.lua er omkring 600 linjer kode, og der findes også action-event.lua og action-status.lua.

I action-event.lua står logikken for, om spilleren har klikket på en handlingsknap som ’tag’ og så fx et æble, ‘selectedItem’. Eller ‘giv til’ > selectedActor. Her står al logikken for, hvad en spiller kan gøre (sammen med en beskrevet yaml-handling). Til sidst udføres handlingen.

local activeActor = entityManager:find({movableByUserInput = true}, "Player")
action:execute(
  {
      action = tonumber(self.selectedActionButton.name),
      initiator = #activeActor > 0 and activeActor[1] or nil,
      selectedActionButton = self.selectedActionButton,
      selectedActor = self.selectedActor,
      selectedItem = self.selectedItem,
      selectedInventoryItem = self.selectedInventoryItem,
      selectedInventoryItem2 = self.selectedInventoryItem2
  }
)

Der står for meget i action.lua, men herunder er nogle vigtige dele. Jeg laver et særligt objekt for hver yaml-handlingstype med al logikken i. Det objekt bliver genbrugt hele tiden.

-- intial only once for the whole game
function Action:new()
  self.actionObject = {}
  self.actionObject[Action.WALK_TO] = ActionWalkTo()
  self.actionObject[Action.SAY] = ActionSay()
  self.actionObject[Action.SAY_OPTIONS] = ActionSayOptions()
  self.actionObject[Action.INVENTORY] = ActionInventory()
  self.actionObject[Action.POPUP] = ActionPopup()
  self.actionObject[Action.ANIMATION] = ActionAnimation()
  self.actionObject[Action.CAMERA] = ActionCamera()
  self.actionObject[Action.TEXT] = ActionText()
  self.actionObject[Action.ACTION_MODIFY] = ActionModify()
  self.actionObject[Action.TRIGGER] = ActionTrigger()
  self.actionObject[Action.STATEMENT] = ActionStatement()
  self.actionObject[Action.AUDIO] = ActionAudio()
  self.actionObject[Action.PARTICLE_SYSTEM] = ActionParticleSystem()
end


function Action:processActionList(actionList, actionListIndex, triggerData, afterProcessActionListCallback)
   ...

    -- maybe this action may run once
    if self:didRunOnce(actionId, actionData) then
        -- maybe there is another (next) action in the list that don't have run_once
        self:processActionList(actionList, actionListIndex + 1, triggerData, afterProcessActionListCallback)
        return
    end

    -- going to start this action
    -- maybe there are children, update the status to QUEUE and set this actionId on WORKING
    -- this will create all needed action status objects
    for _, actionListObj in pairs(actionList) do
        local actionStatusObj = self:getActionStatusFromList(actionListObj.id)

        if actionListObj.id == actionId then
            self:getActionStatusFromList(actionListObj.id):setStatus(ActionStatus.WORKING)
        elseif actionStatusObj:getStatus() == ActionStatus.WORKING or actionStatusObj:getStatus() == ActionStatus.DONE then
            -- do nothing
        else
            self:getActionStatusFromList(actionListObj.id):setStatus(ActionStatus.QUEUE)
        end
    end

    -- start the action
    self.actionObject[actionData.action]:execute(
        triggerData,
        actionData,
        actionList,
        actionListIndex,
        actionId,
        afterProcessActionListCallback
    )
end

Lyd

Et eksempel er handlingstypen audio. Logikklassen til den ligger i framework.core.action.audio.lua og styres på følgende måde fra action/.yml-filerne

*action-use-direct:
  *inventory-strange-whistle:
    *martin:
      - <<: *audio
        id: 100072
        audiosetName: martin-play-strange-whistle.ogg
        audiosetStatus: *audioset-playing

---@class ActionAudioActionData
---@field wait? integer The time to wait before starting the next action, default 0 sec.
---@field run_once? boolean If you want to run this action once
---@field audiosetName string The audioset name "something.ogg"
---@field audiosetStatus integer<Audioset.IDLE|Audioset.PLAYING|Audioset.PAUSE>
---@field dontWaitForCallback? boolean Wait until the audioset is done playing default false

---@param triggerData triggerData
---@param actionData ActionAudioActionData
---@param actionList table
---@param actionListIndex integer
---@param actionId integer
---@param afterProcessActionListCallback function
function ActionAudio:execute(
    triggerData,
    actionData,
    actionList,
    actionListIndex,
    actionId,
    afterProcessActionListCallback)
    ---@type Audioset
    local audioset =
        entityManager:findOne(
        {
            name = actionData.audiosetName
        },
        "Audioset"
    )

    -- create the callbacks first
    if actionData.dontWaitForCallback ~= true then
        audioset.callbackAfterStopped["actionAudiosetCallbackAfterStopped"] = function(s, framekey)
            action:afterProcessActionListAction(
                self,
                triggerData,
                actionData,
                actionList,
                actionListIndex,
                actionId,
                afterProcessActionListCallback
            )
        end
    end

    audioset:setAudiosetStatus(actionData.audiosetStatus)

    audioset:play()

    if actionData.dontWaitForCallback == true then
        action:afterProcessActionListAction(
            self,
            triggerData,
            actionData,
            actionList,
            actionListIndex,
            actionId,
            afterProcessActionListCallback
        )
    end
end

return ActionAudio

Til sidst

Alt er sat op, så engine3 og spillet er adskilt. Det er nødvendigt for at gøre det overskueligt. Hvis man programmerede alle handlinger på en fast måde i spillet, ville man løbe ind i enorme problemer. Det er bedre at lave generiske funktioner, der kan behandle alle handlinger.